Home / Interested in a Hastelloy Filter Dryer with Disepensing Isolator?

Interested in a Hastelloy Filter Dryer with Disepensing Isolator?

March 11, 2019

BUILT & AVAILABLE FOR PURCHASE TODAY!

The PSL ex-display 0.25m2 Alloy 22 Filter Dryer with Dispensing Isolator, please contact your sales representative for more information.

PSL’s Filter Dryers are innovatively designed and engineered to a highly ergonomic and efficient standard. 30 years’ experience provides advanced filtration and drying performance along with high levels of safety and quality that meet all industry regulations. Working in partnership with our customer, we ensure their exact requirements are fulfilled.

Benefits of PSL’s Filter Dryer

  • Highly efficient drying due to unique under-plate heating systems
  • Minimum gap design allowing reflux cleaning to achieve typically 2.5ppm to non-detectable
  • Minimum solvent volumes beneath mesh for process optimisation
  • Pioneers of Discharging Isolators to improve productivity
  • One single piece agitator and shaft, pressure tested, to prevent leakage of heat transfer fluid

This ex-display 0.25m2 Alloy 22 Filter Dryer with Dispensing Isolator is suitable for use in a Class I Division 1 Groups C&D T3C hazardous areas with an NRTL approved electrical control panel and is available for purchase today.

Filter Dryer Information
Design Pressure F/V to +100 psig
Design Temperature -30 to +160°C
Design Code ASME VIII Div1 : 2010 ‘U’ stamped
Cake Volume 75 Litres
Vessel Volume Approximately 200 litres (below CIP RING)
Vessel Material Alloy 22
Vessel Heating Heated jacket, base and agitator
Agitator Speed Range 3 to 30rpm
Agitator Stroke 300mm
Upper Isolator Information
Isolator Material Alloy 22
Glove-ports 2×12” elliptical
N2 Purge System Complete with oxygen monitoring system
Air Purge System Room air purge recovery
Lower Isolator Information
Isolator Material 316 Stainless Steel
Glove-ports 2×8” ovals
Extract Systems Slave from upper chamber
Home / Interested in a Hastelloy Filter Dryer with Disepensing Isolator?